• Advertisement
To advertise, place classifieds free ads by category in a forum as a new topic, or in the classified display ads section, or start a classifieds free blog.

slip rings in stock suppliers

slip rings in stock suppliers

Postby zhanghanjt » Mon Mar 11, 2019 7:31 am

Through hole slip ring ---BTH1235
A slip ring is an electromechanical device that allows the transmission of power and electrical signals from a stationary to a rotating structure. A standard through hole slip ring can be used in any electromechanical system that requires rotation while transmitting power or signals. Its inner part rotates with a rotating shaft pass through the inner hole, so we call it " through hole slip ring".It can improve mechanical performance, simplify system operation and eliminate damage-prone wires dangling from movable joints.
Parameters:
Mechanical :
Working speed500rpm
Operating temperature-40℃~ +100℃
Contact materialPrecious metal
IP GradeIP 54
Electrical:
Circuit6 & 12
Current2A
Voltage240V or 380V
Dielectric strength≥1000V@50Hz between each circuit
Insulation resistance1000MΩ@ 500VDC
Electric noise≤7mΩ
Lead wire size26AWG, UL, color Teflon, silver or tin plated
Lead wire length200mm
Life-span120,000,000rounds
Dimension:
TYPERingsLengthIDOD
BHT1235-6623.6mmΦ12.7mmΦ35mm
BTH1235-121237.4mmΦ12.7mmΦ35mm
Features of Through hole slip rings :
• Low noise
• Wear-resisting (Silver or gold contacting)
• Good impact resistance
• Signal and current compatible
• Workable in hostile environment(-40℃~ +100℃)
• Flexible design for special requirements
Alternatives of Through hole slip rings:
• Circuits
• Loading of each circuit
• Wire length
• Inner hole /outer hole diameter or length
• Working speed
• Gold contacting
• Housing color
Typical Applications of through hole slip rings:
Aerospace / Defense
• Armored vehicle turrets, IR and EO systems
• Missile seeker gimbals and inertial systems
• Helicopter de-ice systems, EO / IR trackers and target systems
• Fixed-wing aircraft - EO / IR trackers, fire control systems, surveillance systems and targeting systems
• Missile counter measures
• Space - solar array mechanisms
• Shipboard / submersible - navigation systems and fire control radar
• Surveillance systems
Industrial
• Medical equipment and devices
• Robotics
• Index tables
• Semiconductor handling
• Pan tilt cameras
• Packaging and processing equipment
• Cable reels
• Wind energy
• CT scanners
Marine
• Remote operated vehicles (UAV/ROV/Drone)
• Seismic surveying
• Oceanographic winches
• Subsea communications and control
• Floating production, storage and offshore loading (FPSO)
• Diving
• Marine instrumentation
• Down hole / wire logging and drilling

Advantages of slip ring manufacturer---ByTune:
•Affordable price
•Quality guaranteed
•Response within 24 hours
•Prompt delivery
•Reliable package & shipment
•Flexible & quick customization
Delivery time and shipment:
•2 weeks ARO
•By UPS ,DHL or FedEx (depends on your location) 3 days door to door service
Installation Guide:
Proper use and mounting instruction:
◆Slip ring can not support the weight of equipment which connected with it, rotating equipment should be fastened so that its weight will not fall on the rotor.
◆No force to slip ring in the direction of parallel to axis.
◆No damage to the surface of lead wire while equipment rotating, all lead wire can not
bear weight while being aligned.
◆Because of possible geometric mismatching between the customer's system and the
slip ring, "hard mounting "of both ends of the slip ring (i.e., securing the rotor and stator such that is NO floating during operation) is not recommended and it may cause premature failure.
◆Without specifying, all parameter should be within the range of specification indicated, such as :
Working Speed
Voltage
Current
Dielectric Strength Protection Grade
◆It is very precise component, please do not disassemble it .
◆ If start working after long time storage, please rotate it 5-10 minutes non-load.
◆ While working, each circuit should be with protection of over-loading to avoid being burned.
Recommandation:
BTH0932
BTH1256
BTC035
Measurement and Test:

3D Test Concentricity Test

Electric noise Test Projecto

Interference test Reliable contact Test
slip rings in stock suppliers
website: http://www.btslipring.com/standard-thro ... lip-ring-1
zhanghanjt
 
Posts: 4
Joined: Mon Mar 11, 2019 7:28 am
Blog: View Blog (0)

  • Similar Topics
    Replies
    Views
    Last post

Return to Industrial & Scientific


Mobile Device
  • 1
  • FREE CLASSIFIED ADS
    Free Classified Ads
    There are 3 ways to advertise - your choice: you can place free ads in a forum topic, in the classified display ads section, or you may start your own free blog. Please select the appropriate category and forum for the ad content before you post. Do not spam.
    Caveat emptor - let the buyer beware. Deal at your own risk and peril.
  • Advertisement