• Advertisement
To advertise, place classifieds free ads by category in a forum as a new topic, or in the classified display ads section, or start a classifieds free blog.

Factors that Affect Yarn Strength - Marked, fiber/yarn manufacturers

Factors that Affect Yarn Strength - Marked, fiber/yarn manufacturers

Postby Cora » Sat Sep 30, 2017 7:38 am

Staple length
Longer staple cotton gives higher strength and this is true even in case of synthetic staple fibre such as nylon and terelene. Low twist factors will give stronger yarn is case of longest fibre.

Fibre fineness
Fine fibre gives strong yarn compared to coarse fibres which are spun into same given count of yarn. This is due to the fact that more number of fibres in the cross-section and also increased internal friction provided by the higher number of fibres in the cross section of the yarn. Hence the result is higher yarn strength.

Fibre strength
Logically speaking fine fibre result in providing strong yarn but the paradoxical statement of Dr. Balls states that, weak and fine fibres produce stronger yarn. In the Case of cotton fibre, fibres will have longer length and hence more number of fine fibre can be accumulated in the same cross-section and such as strength of individual fibre is of no significance. Therefore yarn strength is the strength of group of fibres.

Twist
For a single spun yarn, increases in twist gives a higher strength up to a certain limit and any twist than this optimum will decrease the strength. The amount of twist for maximum strength depends on the twist angle and for any given fibre the twist angle for maximum strength remains constant over a range of yarns.

Evenness
Evenness in the yarn or uniformity in the spun yarn influences the yarn strength. Greater uniformity shows increase in strength and uneven yarn will show reduction in strength. Investigation has proved that there is a very close relationship between yarn strength and yarn evenness.

Fibre length variation and distribution
Fibre length variation and distribution will also cause the variation. When spinning cotton, containing more number of short fibres, the resultant yarn will have lower strength. The presence of short fibres, the resultant yarn will have lower strength. The present of short fibres influence, to a very great extent, the yarn strength. Therefore limitations have to be introduced while mixing such fibres.

Fibre finish
The man-made fibres, especially synthetic fibres, are treated with several chemicals to change the processing character. The type and amount of chemicals will have a definite influence on the strength properties of yarn and also on the processing characteristics of staple fibres.

General factors
There are many other variables which also influence the strength property of yarn. The chemical treatment given to the yarn after spinning such as sizing etc will either increase the strength or decrease the strength. Some of the chemicals tender the material and there will be loss in strength. Apart from this chemical treatment, the position of individual fibres in the characteristic yarn will also affect the tensile property since the building up of a spun yarn is a resultant factor of drafting and twisting. The twist is dynamic property. The twist in the yarn is stabilized only when the dynamic balance also influences the tensile property.

related machines:
Wrap Reel
Automatic Single Yarn Strength Tester
Cora
 
Posts: 33
Joined: Tue Aug 29, 2017 2:54 am
Blog: View Blog (8)

  • Similar Topics
    Replies
    Views
    Last post

Return to Textiles, Yarn, Fabric & Garnments


Mobile Device
  • 1
  • FREE CLASSIFIED ADS
    Free Classified Ads
    There are 3 ways to advertise - your choice: you can place free ads in a forum topic, in the classified display ads section, or you may start your own free blog. Please select the appropriate category and forum for the ad content before you post. Do not spam.
    Caveat emptor - let the buyer beware. Deal at your own risk and peril.
  • Advertisement